The eVolve Smart Wall Box is an advanced wall mounted charging station with an aluminum and ABS plastic enclosure.
The station is fitted with two Type 2 sockets OR two type 2 tethered cables. It has twin on-board Type B RCDs for protection against DC leakage. This is a legal requirement. The station can be connected to a local network via its ethernet port or by 4G modem to a mobile network.
The station is also available in a master/slave configuration suitable for clustered charging station installations where one station is used to command and control the other stations and act as a single communications gateway to the back end management and billing systems.
S
T
MASTER
SLAVE
Phase Type: Single Phase (1P) Three Phase (3P) N/A N/A Connection: Type 2 (T2) Type 2 (T2) N/A N/A Number of Plugs: 2 2 N/A N/A Power Supply: 230 Volts AC 400 Volts AC N/A N/A Max. Input Current: 64 Amps 64 Amps N/A N/A Max. Input Power: 14.8 kW 44 kW N/A N/A Socket/Cable: Socket Socket N/A N/A OUTLET A / B Output Current: 32 Amps / 32 Amps 32 Amps / 32 Amps N/A N/A Output Power: 7.4kW / 7.4kW 22 kW / 22 kW N/A N/A Socket Type: Type 2 Socket
Type 2 Socket
N/A N/A OPTIONAL ACCESSORIES 4G Modem (Latam/AU):
$480.32 (Ex) or $528.35 (Inc)
$480.32 (Ex) or $528.35 (Inc) $2548.62 (Ex) or $2803.48 (Inc) N/A Customisation - labelling: Please enquire for a quote. Please enquire for a quote. Please enquire for a quote. Please enquire for a quote. Tethered Cable (Pair): Please enquire for a quote. Please enquire for a quote. Please enquire for a quote. Please enquire for a quote. Anti-Vandal Key:
$101.29 (Ex) or $111.42 (Inc) $101.29 (Ex) or $111.42 (Inc) $101.29 (Ex) or $111.42 (Inc) $101.29 (Ex) or $111.42 (Inc) Switch to connect up to 6 slaves to the master: N/A N/A $375.76 (Ex) or $413.33 (Inc) N/A
Download the eVolve Installation Manual
ALL ABOUT EVOLVE WALL BOX
The eVolve Smart T Wall Box can be either single phase (7kW) or three phase (22kW). It can be situated as 1 station per 2 parking spaces, with 1 or 2 sockets.
POWER SUPPLY
The output of kW can be dialled down via a software configuration change if the power supply is inadequate for the rating of the station. The output of kW can also be load balanced across 2 sockets.
MAIN FEATURES
- Optional Type A/B internal RCDS,
- On-board ethernet and 3G modem for networking,
- IP54/IK10 Rating and,
- Large enclosure for optional RCDs.
ALUMINIUM AND ABS PLASTIC STRUCTURE
The charger’s housing, aluminium and ABS plastic have been combined in a robust structural design that provides protection to both mechanical stress and severe environmental conditions, increasing the charger lifespan and avoiding its replacement in just a few years.